Brother Concealed Zipper Foot (K) for All Models

Suitable for all 5mm & 7mm Models

Brother Concealed Zipper Foot allows you to install invisible zippers easily and quickly, without using an iron or basting stitches. Just finger press the zipper coils up and align them with the groove of the foot. The guide in front of the foot will hold your zipper firmly in place as you sew. 

1. Press iron-on interfacing tape to the seam allowance where the zipper will be placed.
2. Baste the seam closed and press.
3. Baste the zipper along the seam allowance.
4. Close the zipper and baste along the seam allowance on both sides of the zipper opening.
5. Cut the basting stitches in the seam.
6. Make the coil stand and sew, holding coil to reference lines in zipper on both sides of zipper.
7. Turn and pull up tab.
8. Fasten metal stop at lower edge of zipper.

This foot replaces the F004N Concealed Zipper Foot.